RIG Series

Automation with the ease of mind and full support

Our RIG routers are indispensable tools for any workshop due to their versatility, user-friendliness, and reliability. They are crafted with the highest-quality and most widely used components, conveniently accessible through FGP, online vendors, or nearby suppliers. Additionally, the routers can be powered by single-phase or 3-phase 220v, making them perfect for any workshop.

We offer seamless remote connection through Chrome remote desktop for software assistance or operator training.

3axis CNC router machine
Most Popular CNC Machines

Most Popular CNC Machines

Powerful 7hp Air Cooled Spindle

Powerful 7hp Air Cooled Spindle

Single Phase or 3 Phase Power

Single Phase or 3 Phase Power

Perfect CNC for Everyday Use

Perfect CNC for Everyday Use

Starting at $22,000CAD

Request a Quote

The Ultimate Solution for Efficient Job Completion

Are you looking for a reliable and efficient solution to get your job done? Look no further than RIG routers. Our routers come equipped with powerful motors, heavy steel frames, air-cooled spindle heads, linear rails, and low backlash helical rack/pinion, making them the perfect choice for any task.

We take pride in our electrical panels, which are wired with Canadian standards and grounded to eliminate low-level electric noise. The router’s interface can accept G-code and M-Code from all CAD/CAM design software, including Fusion360, Mozaik, Enroute, and Vectric. Even if you have no previous CNC experience, most of our clients are up and running within two days of training.

Unlike other vendors, we have units in stock and ready to ship, so you can start your project without any delay. And the best part? Our prices are just a fraction of those of other prominent brand manufacturers, starting at only CAD 21,000. Choose RIG routers and get the job done efficiently and affordably.

Features

Special Features Include:

  • Single phase or 3 phase power connection 220 Volts and 25 Amps
  • Intuitive controller with graphical user interface
  • Secondary wireless hand-held controller, a range of up to 30 feet
  • High torque, high-speed motors
  • Self-lubricating rails and bearings
  • Heavy construction (Weight over 1,400 KG)
  • Automatic tool setting sensor
  • Motor calibration software

Functions

A Reliable and Affordable Solution for All Your CNC Needs

Looking for a reliable and affordable CNC router that can handle a wide range of tasks? Look no further than the RIG CNC router. Our Canadian-engineered and certified machine is equipped with a powerful 5HP spindle head, high torque motors, an easy hold-down vacuum system, and a graphical user interface – all at an unbeatable price.

Whether you’re a signmaker cutting aluminum, a cabinet craftsman nesting MDF sheets, a furniture designer carving cedar, or a movie production specialist cutting foam or doing custom prototyping, the RIG CNC router has everything you need to get the job done right.

With its versatile functions and low price, the RIG CNC router is the perfect solution for anyone looking for an affordable yet reliable CNC machine. Don’t settle for less – choose RIG and take your production capabilities to the next level.

DETAILS

Rig Series Details


We always have a stock of CNC routers available for you. Heavy-weight, extremely powerful, and versatile, the possibilities are endless with our routers. These routers do not lose their market value, and even after many years of use, we can still trade or sell the unit for you.

Some standard features include:

  • Steel frame construction
  • 25mm linear rails with self-lubricating cartridge
  • Helical low backlash rack and pinion
  • Hybrid motors with an encoder feedback loop for higher accuracy
  • Industrial 5hp air cooled spindle head (Upgradable to 7hp, 10hp, or 12Hp)
  • FGP controller with graphical user interface
  • Vacuum tabletop with T-slot assist for clamps or jigs
  • Practical and well-designed dust collector head

FGP provides onsite training, support, and remote login assistance

SOFTWARE TRAINING: FGP is the ONLY company that includes FREE installation and training for all its customers. This training includes machine operation and basic CAD/CAM programming. At the end of the training, any operator can design a job, create machine code and run their CNC!

PHOTOS

Rig Series Photos


SPECS

Rig Machine Specs


SPECS
Table Size 4’x4’ (1300 x 1300mm) with 10″ of clearance

4’x8’ (1300 x 2500mm) with 10″ of clearance

5’x10’ (1500 x 3000mm) with 10″ of clearance

Frame Heavy duty steel frame, heat treated and stress relieved
Spindle Motor 5HP (3.5KW) 220V manual collet Spindle. Air-cooling spindle head
Tool Changer Non (Upgradable to ATC)
VFD Inverter Included
Linear Motion Taiwan HIWIN 25 mm rails for X,Y
Transmission Taiwan Miko Helical rack and pinion for X,Y

Taiwan TBI ball screw for Z

Optional: All-axis ballscrew transmission system.

Motors and Drives Hybrid / Servo motors with closed-loop feedback
Table top Vacuum cross-hatch hard phenolic table top with T-slot assist. Separate vacuum zones
Controller FGP control system with graphical user interface
Lubrication Maintenance-free self-lubricating bearings
Travel 1000 IPM rapid travel
Install & training FGP offers free installation and training on all machines! Training in software, CNC, design, CAM, and maintenance
FEATURES

Standard Features


  • Small router with a heavy frame to dampen vibration
  • Industrial 25mm rails and helical racks
  • Remote log-in support for troubleshooting
  • Tool sensor for material and job reference
  • Onscreen assistance and job simulation
  • Software tuning calibration
  • Expandable control system for custom applications
  • Spindle speed control via programming
  • Manual override of spindle speed and feed speed during runs
  • Maintenance-free lubrication system
SOFTWARE

Software


  • Machine runs on standard Gcode
  • Machine is compatible with most industry CAM/CAD software
  • FGP can provide CAM/CAD design software for 2 D/ 3 D production. We recommend VCarve Pro; AlphaCam; Enroute; Artcam. We can provide machine compatible software for cabinet and custom furniture design.

 

logos combined

PUMPS

Vacuum hold down pumps


Unlike other CNC routers that would require huge, noisy and expansive vacuum pumps our clients can use small single phase or even 120V hold down pumps. This is due to our plumbing and zoning of the machine.

Economy option (Might require clamp assist on small parts)

German made Fein pump 

This pump cost less than $700 and powerful for most applications that use large material surface. On smaller parts operator might need clamp assist.

  • High performance turbine engine with 150 CFM
  • Low volume less than 66 db
  • 120 V single phase 1,100 watts

Industrial Hold Down Vacuum Pump

USA made Hurricane pump 

This industrial-grade single-phase 220v vacuum pump is ideal for mid to large CNC table sizes from 5’x 5′ up to 5’x 8′ (or 25 ft² to 40 ft²). The integrated filtered air cooling and relief valve systems keep your Hurricane running cooler while the sound dampening base keeps the unit running quieter than other comparable systems.

  • ~400 CFM
  • 9.5 – 10 inHg Sealed Vacuum
  • 3″ Threaded Steel Intake Port
  • Dimensions: 34″x 17.5″x 17.5″
  • Single Phase 220 – 240 VAC / 30 Amps
  • NEMA L6-30P Plug (USA and Canada Spec)
  • 4 Long Life High Performance Vacuum Motors
ACCESSORIES

Rig Accessories


Accessories Included with each machine

  • Tool measure sensor
  • 3 endmill cutting bits
  • 1 ER25 collet
  • 1 ER25 collet wrench and 1 spindle shaft wrench
  • Vacuum zone rubber gasketing
  • Tabel adjustment leveling feet

Accessories available to purchase

  • Starter package
  • 2-1/2″ double insert spoil board surfacer
  • 1/8″ , 1/4″ and 1/2″ carbide spiral cutting endmills for wood, plastic and aluminum
  • 1/4″ spiral ball nose carbide for 3D work
  • 1/4″ V-bit for engraving
MANUALS

Rig Manuals


FGP CNC Products

We design and manufacture computerized 3 Axis and 4 Axis router tables, 3 Axis Laser cutting machines, and plasma tables.

High Gantry Clearance CNC router

Request a Quote

Please fill out the form below for buying, selling, trading or technical support inquiries. We reply back within 24 hours to assist you with your quote.

TOLL FREE

1-800-409-5954